B&R AUTOMATION

$0.00
2005 analog mixed module, 5 inputs, 0 to 10 V, 12-bit, 3 outputs, ±10 V, 12-bit, 1 potentiometer voltage +10 V, 2 potentiometer voltage terminals, order 1x...
+

Not in stock, please check availability
Out of stock

$6,490.00
MATERIAL NUMBER: 8BVI0055HWD0.000-1 DESCRIPTION: Integrated uncontrolled standstill and safe stop Integrated connection for motor holding brake...
Out of stock

$1,098.00
B&R Automation 0AC808.9-1 8-port industrial hub (layer 2), 24 VDC, 10/100 Mbit/s with autonegotiation, automatic MDIX, (order TB704 terminal block...
Out of stock

Out of stock


Not in stock, please check availability
Control for 2 motors 2 EnDat 2.2 interfaces Motor connector: 24 to 64 VDC ±25%,  nominal 8 ARMS  ( maximum 10.6 ARMS )...
Out of stock

$5,450.00
MATERIAL NUMBER: 8B0C0320HW00.002-1 DESCRIPTION: Connections for supplying external 24 V devices Extensive protective measures ACOPOSmulti...
+

$1,855.00
MATERIAL NUMBER: 8B0M0050HW00.000-1 DESCRIPTION: Pioneering power distribution system Integrated distribution of power and auxiliary power...
Out of stock

$0.00
From version: 2.8 Designation: ACPmulti MPL 10STP HV W Description: ACOPOSmulti mounting plate with backplane, 10 slots, HV, wall...
+

$4,650.00
  8B0P0440HW00.000-1 | 8B0P0440HW000001 B&R ID code 0xA8EA Cooling and mounting type...
1 in stock
+


$6,550.00
MATERIAL NUMBER: 8BVI0110HWD0.000-1 DESCRIPTION: Integrated uncontrolled standstill and safe stop Integrated connection for motor holding brake...
+

$9,144.00
MATERIAL NUMBER: 8BVI0330HWS0.000-1 DESCRIPTION: Uncontrolled stops and safe stop integrated Integrated connection for motor motor holding brake...
Out of stock

Not in stock, please check availability
Out of stock


$2,077.00
General information Slots for plug-in modules 1 Mains connection Network configurations TN-S, TN-C-S with grounded neutral Mains...
Out of stock

Not in stock, please check availability
Out of stock


$0.00

Synchronous motor, number of pole pairs: 5 pairs, nominal speed: 6,000 rpm, stall torque: 6.000 Nm, motor with holding brake, smooth shaft angled connector (swivel) single-cable solution, centering diameter 95 mm, j6 fit (self-cooling, construction type A), IP64 protection, without oil seal 560 VDC, brake holding torque: 8.00 Nm, DB ind. 32-line multi-turn V2


Out of stock

Not in stock, please check availability
Out of stock

Not in stock, please check availability
Out of stock

Not in stock, please check availability
Out of stock

Not in stock, please check availability
Out of stock