Schneider Electric LXM28AU20M3X motion servo drive, Lexium 28, three phase 200...230 V, 2 kW

Not in stock, please click on LEADTIME to check availability and price
LEADTIME
Weight: 4.000 lbs
LXM28AU20M3X
On backorder | delivery ~3 weeks

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase), an output current of 12A, nominal power of 2kW and continuous power of 2000W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 62mm (width) x 184mm (depth) x 170mm (height). It weighs 1.7kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 4 motor stacks) at 2000W and servo motor BCH2 (100mm, 2 motor stacks) at 2000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.


Main

Range of ProductLexium 28
Product or Component TypeMotion servo drive
device short nameLXM28A
format of the driveCompact housing
line current8.7 A 137.1 % 220 V, three phase

Complementary>th >[Us] rated supply voltage

Phase
220 V - 10...15 %)three phase
supply voltage limits200…255 V three phase
supply frequency50/60 Hz - 5...5 >#/span###
Network Frequency47.5...63 Hz
EMC filterWithout EMC filter
continuous output current12 A 8 kHz
output current 3s peak36 A 220 V
continuous power2000 W 220 V
nominal power2 kW 220 V 8 kHz
switching frequency8 kHz
overvoltage categoryIII
maximum leakage current1.35 mA
output voltage<= power supply voltage
electrical isolationBetween power and control
type of cableShielded motor cable 32…131 °F (0…55 °C)) copper
electrical connectionSpring terminal 3.3...4 mm², AWG 12 L1-L2)
Spring terminal 3.3...4 mm², AWG 12 R, S, T)
Spring terminal 3.3...4 mm², AWG 12 U, V, W, PE)
Spring terminal 3.3...4 mm², AWG 12 PA/+, PBe)
discrete input number8 programmable CN1)
1 pulse train input (PTI) CN1)
2 fast capture CN1)
1 safety function STO CN9)
discrete input voltage24 V DC logic
discrete input logicPositive or negative CN1)
discrete output number5 logic output CN1)12...24 V DC
1 pulse train output (PTO) CN1)
discrete output voltage12...24 V DC
discrete output logicPositive or negative CN1)
analogue input number2
absolute accuracy error0.1 >#/span###
analogue input typeV_REF voltage analog input - 10...10 V 10 kOhm 14 bits
T_REF voltage analog input
control signal typeServo motor encoder feedback CN2
protection typeAgainst reverse polarity inputs signal
Against short-circuits outputs signal
Overcurrent motor
Overvoltage motor
Undervoltage motor
Overheating motor
Overload motor
Overspeed motor
safety functionSTO (safe torque off), Integrated
safety levelSIL 2 IEC 61800-5-2 2007
SIL 2 IEC 61508-1 2010
PL d/category 3 EN/ISO 13849-1 2008
SIL 2 EN/ISO 13849-1 2009/AC
SIL 2 EN 60204-1 2006
SIL 2 EN 60204-1 2009/A1
SIL 2 EN 60204-1 2010/AC
SIL 2 IEC 62061 2012
communication interfaceCANopen, Integrated
CANmotion, Integrated
connector typeRJ45 CN4)CANopen, CANmotion
method of accessSlave
transmission rate250 kbit/s 328.08…820.21 ft (100…250 m) CANopen, CANmotion
500 kbit/s 13.12…328.08 ft (4…100 m) CANopen, CANmotion
1 Mbit/s 13.12 ft (4 m) CANopen, CANmotion
number of addresses1…127 CANopen, CANmotion
physical interfaceRS485 Modbus Serial line slave
status LEDCharge 1 LED Red)
RUN 1 LED Green)
Error 1 LED Red)
signalling functionServo status and fault codes five 7-segment display units
markingCE
CSA
CULus
type of coolingIntegrated fan
operating positionVertical
product compatibilityServo motor BCH2 5.12 in (130 mm), 4 2000 W
Servo motor BCH2 3.94 in (100 mm), 2 2000 W
Servo motor BCH2 7.09 in (180 mm), 1 2000 W
Width2.44 in (62 mm)
Height6.69 in (170 mm)
Depth7.24 in (184 mm)
Net Weight3.75 lb(US) (1.7 kg)
output current 3s peak 236 A 220 V
output current 3s peak 336 A 220 V

Environment

electromagnetic compatibilityConducted emission level 3category C3 EN/IEC 61800-3
standardsEN/IEC 61800-5-1
Product CertificationsCULus
CSA
CE
IP degree of protectionIP20
vibration resistance3M4 3 mm 9…200 Hz)IEC 60721-3-3
shock resistance10 gn, type I IEC 60721-3-3
relative humidity5…95 % without condensation
Ambient Air Temperature for Operation32…131 °F (0…55 °C)
Ambient Air Temperature for Storage-13…149 °F (-25…65 °C)
operating altitude<= 3280.84 ft (1000 m) without derating
> 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m

Ordering and shipping details

Category18262-LEXIUM 23/28 SERVO DRIVES
Discount SchedulePC51
GTIN3606480711824
Number of Units in Package 11
Package 1 Weight4.12 lb(US) (1.87 kg)
ReturnabilityNo
Country of originCN

Packing Units

Unit Type of Package 1PCE
Package 1 Height3.77 in (9.582 cm)
Package 1 Width10.04 in (25.497 cm)
Package 1 Length10.23 in (25.982 cm)


Brands:
SCHNEIDER ELECTRIC
Condition:
New

Price history Price history