Description
AVENTICS Series NL2 Air Preparation Units
The AVENTICS Series NL maintenance units are suitable for all areas: as individual components or as assembled maintenance units, for centralized or decentralized compressed air preparation, in compact or powerful versions, for use in high or low temperatures. This line offers a complete, customizable compressed air preparation technology. It includes an option to combine every component in the Series to achieve the desired function, making it possible to adjust the components precisely to the application requirements.
Technical data
Industry Industrial
Parts Filter pressure regulator
Reservoir reservoir, polycarbonate, without protective guard
Port G 1/4
Nominal flow Qn 1650 l/min
Filter porosity 5 μm
Condensate drain semi-automatic, open without pressure
Pressure gauge with pressure gauge
Min. working pressure 2 bar
Max. working pressure 16 bar
Min. ambient temperature -10 °C
Max. ambient temperature 60 °C
Min. regulation range 0.5 bar
Max. regulation range 10 bar
Type 1-part
Type Can be assembled into blocks
Pressure supply single
Mounting orientation vertical
Regulator type Diaphragm-type pressure regulator
Regulator function with relieving air exhaust
Filter element exchangeable
Filter reservoir volume 25 cm³
Max. achievable compressed air class acc. to
ISO 8573-1:2010
6 : 7 : -
Medium Compressed air
Neutral gases
Weight 0.542 kg
Material
Housing material Die cast zinc
Seal material Acrylonitrile butadiene rubber
Material front plate Acrylonitrile butadiene styrene
Material reservoir Polycarbonate
Material filter insert Polyethylene
Part No. 0821300300
Technical information
The pressure dew point must be at least 15 °C less than ambient and medium temperature and
may not exceed 3 °C.
Nominal flow Qn with secondary pressure p2 = 6 bar at Δp = 1 bar
Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be
found at "Customer information".
A change in the flow direction (from air supply on the left to air supply on the right) occurs by
rotating installation by 180° about the vertical axis. Please see the operating instructions for further
details.
Also suitable for separation of fluid oil or water due to the design.
The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the
front connection is open. Depending on the customer application, a second blanking plug may be
necessary. Please order separately (see accessories).
Features
Attachments
MANUFACTURERS
Price history
The price has not changed yet. We will show it on this chart once it changes