The EL9184 potential distribution terminal provides the supply voltage via the front-side terminal contacts.
24 V and 0 V can each be tapped 8x from the front. The power contacts are connected to the front-side terminal contacts and are passed through to the adjacent terminal. With the EL9184, the use of additional terminal blocks on the terminal strip can be reduced. The HD EtherCAT Terminals (high density) with increased packing density contain 16 connection points in the housing of a 12 mm-wide EtherCAT Terminal. Solid wire conductors can be connected without tools using the direct plug-in technique.
| Technical data | EL9184 |
|---|---|
| Technology | potential distribution terminal |
| Number of outputs | e.g.: 8 x 24 V contact, 8 x 0 V contact |
| Current load | ≤ 10 A |
| Nominal voltage | ≤ 60 V |
| Electrical isolation | 500 V (E-bus/field potential) |
| Connection facility to additional power contact | 8 |
| Bit width in the process image | 0 |
| Housing width | 12 mm |
| Side by side mounting on EtherCAT Terminals with power contact | yes, left without PE |
| Special features | direct plug-in technique |
| Conductor types | solid wire, stranded wire and ferrule |
| Conductor connection | solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver |
| Rated cross-section | solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm² |
| Weight | approx. 60 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Approvals/markings | CE, UL, ATEX |
| Ex marking | II 3 G Ex nA IIC T4 Gc |
| Housing data | EL-12-16pin |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxx series |
| Wiring | solid conductors (e): direct plug-in technique; fine-stranded conductors (f) and ferrule (a): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Connection cross-section AWG | s*: AWG 28…16, st*: AWG 22…16, f*: AWG 26…19 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
*s: solid wire; st: stranded wire; f: with ferrule
Brands:
BECKHOFF
Condition:
new
Price history
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes