Home/Products/Keyence GS-51PC Power-to-release Standard type PNP M12 connector type

Keyence GS-51PC Power-to-release Standard type PNP M12 connector type

KEYENCE, Condition:NEW, ORIGINAL PACKAGING, Source:MANUFACTURER'S NETWORK, Status:ACTIVE

$320.00

Order today and receive in 4 weeks (pay when ready):

$0.00

CHECK AVAILABILITY

Part №: GS-51PC

Availability: PREORDER

Quantity:

+ −

Description

Specifications

Model	GS-51PC
Lock type	Power-to-release type
Type	Standard type
Response time	Lock	Lock→Unlock	220 ms12
Unlock→Lock	220 ms12*3
Lock	Locking force (Fzh)	Min. 2,000 N
Alignment tolerance of lock	±2 mm ±0.08"
Mechanical life-span	1 million cycles or more (with door operation speed of 1 m/s)
Acceptable operation frequency	1 Hz*4
Door radius	Min. 250 mm 9.84"
Auxiliary release	Front, back *5
Cascading	Max. 25 units
Control output (OSSD output)	Output	Transistor outputs × 2
Max. load current	Max. 150 mA
Residual voltage (during ON)	Max 2.5 V (with a cable length of 5 m 16.40')
OFF state voltage	Max 2.0 V (with a cable length of 5 m 16.40')
Leakage current	Max. 0.5 mA
Max. capacitive load	2.2 µF
Load wiring resistance	Max. 2.5 Ω
AUX (Non-safety related output)	Output	Transistor output
Number of outputs	1
Max. load current	50 mA
Residual voltage (during ON)	Max 2.5 V (with a cable length of 5 m 16.40')
External input (Short-circuit current)	Safety input	Approx.1.5 mA × 2
Reset/EDM input	-
Lock control input	Approx. 2.5 mA × 1
OSSD operation switching input	-
Applicable Standards (Safety)	EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
Protection circuit	Reverse current protection, short-circuit protection and surge protection for each output
Power supply	Power voltage	24 V DC ±20 % (Ripple P-P 10 % or less, Class2)
Power consumption	3.4 W*6
Environmental resistance	Enclosure rating	IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
Operating ambient temperature	-20°C to +55C° -4°F to 131°F (No freezing)
Storage temperature	-25°C to +70°C -13°F to 158°F (No freezing)*7
Operating relative humidity	5% to 95%RH
Storage relative humidity
Vibration resistance	10 to 55 Hz, Double amplitude 2.0 mm 0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
Shock resistance	30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3)
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
Cable	PVC
Actuator	Case	PPS, PBT, NBR
Lock	Aluminum alloy, SUS303
Weight	Approx. 380 g
1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). 2 If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) 3 430 ms when locked at the same time the actuator is detected. 4 Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm 0.12", Sar(OFF→ ON) = 10.5 mm 0.41". 5 Do not apply excessive torque (0.45N·m or higher). 6 Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. *7 When stored for a long period of time, please store it at a temperature of 55°C 131°F or lower.