Description
Specification
| Brand/ Manufacturer Mitsubishi |
| |
| Product type Servo Motor | Power rating 0.1 kW | Supply voltage 200 V;400 V |
| Current rating 2.6 A | Output speed 4500 rpm | Torque rating 0.32 Nm |
| Shaft size 8h6 mm (Dia.) | Rotor inertia 0.03 x 10^-4 kgm² | Minimum operating temperature 0 °C |
| Maximum operating temperature 40 °C | Weight 0.53 kg | Height 42 mm |
| Width 42 mm | Depth 149.5 mm |
MITSUBISHI HC-MFS13B Ultra low inertia small power motor
Motor series: ultra low inertia, low power.
Rated output power: 0.1kw.
Rated speed: 3000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP55 does not include the shaft part and the connector.
Features: ultra low inertia is suitable for high frequency operation.
Application examples: the insertion device, the assembly machine.
The length of the line: 2M.
IP level: IP65.
Bending life: high bending life.
Electric motor power supply cable for HF-KP/HF-MP series (motor shaft with side extraction). Motor: HA-SH type.
Power: 3.0kw.
Speed: 1000r/min.
The speed regulating motor can be divided into a constant speed motor, a step less constant speed motor, a step less speed changing motor and a step less speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MITSUBISHI HC-MFS13B
The rotor speed of the induction motor is always slightly lower than that of the rotating magnetic field.
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed MITSUBISHI HC-MFS13B. Fiber length: 0.15 meters.
SSCNET III cables (standard optical fiber used in control cabinet).
Joints for CN1A and CN1B. Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.05kw.
Rated speed: 3000rpm.
With the brake: without.
Shaft end: straight shaft.
AC servo motor and brushless DC servo motor in the function of the difference: AC servo is better, because it is a sine wave control, torque ripple small MITSUBISHI HC-MFS13B.
DC servo is a trapezoidal wave. DC servo is simple and cheap. Type: HA-SE series.
Rated output: 0.5KW.
Rated speed: 2000r/min.
Electromagnetic brake: No.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave.
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation.
The rotor of the servo motor is permanent magnet,
Drivee controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and thhe target value, the driver is compared,
Adjust the rotor rotation angle HC-MFS13B HC-MFS13B.
The accuracy of the servo motor is determined by the accuracy of the encoder.
MANUFACTURERS
Price history
The price has not changed yet. We will show it on this chart once it changes