Description
R7851C1008 self-check flame amplifier 2 or 3 second. For 7800 and R7140 relay; Flame Signal Amplifier, 2 Second or 3 Second Flame Failure Response Time, Dynamic Self Check, Gas, Oil, Coal: Optical (UV Only ) Flame Sensor C7961E and C7961F, Use with 7800 Series Primary Safety Control, Color: White, Flame Signal Strength Ranges from 0.0-5 Vdc
The Honeywell R7851C1008 dynamic flame amplifier
Overview
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Features
- Flame failure response time of 0.8 or 3.0 seconds.
- Flame signal strength ranges from 0.0 to 5.0 Vdc.
- Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
- Flame signal test jacks to measure amplifier flame signal voltage.
- Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
- Compatible with existing Honeywell flame detectors (order separately).
Product Specifications
| Comments | Color: White |
| Approvals, Underwriters Laboratories Inc. | Listed: File No. MP268, Guide No. MCCZ |
| Approvals, Canadian Standards Association | Certified: File No. LR95329-3 |
| Flame Failure Response Time (sec) | 0 sec or 3.0 sec |
| Approvals, Swiss RE | Acceptable |
| Approvals, Factory Mutual | Approved: Report No. 1V9A0.AF |
| Self Checking | Dynamic Self-Check |
| Use With Primary Safety Control | 7800 SERIES Relay Modules |
| Use With Flame Sensor | Gas, oil, coal: optical (UV only) C7961E,F |
Attachments
MANUFACTURERS
Price history
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes