Home/Products/Keyence IB-1000 Amplifier Unit, DIN Rail Type

Keyence IB-1000 Amplifier Unit, DIN Rail Type

KEYENCE, NEW, ORIGINAL PACKAGING, Source:SURPLUS, Status:DISCONTINUED

$415.00

Order today and receive in 4 weeks. Pay when ready:

$0.00

CHECK AVAILABILITY

CODE: IB-1000

Availability: PREORDER

Quantity:

+ −

Description

Specifications

Model	IB-1000
Type	DIN rail mount
Main unit/Expansion unit	Main unit
Head compatibility	Yes
Display	Display resolution	0.01 %, 0.1 %, 1 % (switchable)
Display range	–99.999 to 99.999, –99.99 to 99.99 –99.9 to 99.9, –99 to 99 (switchable)
Digital display method	Dual7-segmentdisplay Upper level: 5 red digits Lower level: 5 green digits
Operating indicators	Judgment indicator: 2-color (green/red) LED (HI, GO, LO) Bank indicator: Green LED x 4 Laser emission warning indicator: Green LED Others: Green LED x 8, red LED x 3
Analog output voltage	±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω *1
Analog current output	4 to 20 mA Maximum load resistance 350 Ω *1
Control Input	Bank switch input, zero shift input	Non-voltage input *2
Control input	Zero shift input
Laser emission stop input
Timing input
Reset input
Adjust input
Control output	Judgment output (check output)	Open collector (NPN/PNP switchable, N.O./N.C. switchable) *3
Power supply	Power consumption	2400 mW or less (at 30 V, 80 mA max.) 4 5 (including analog current output)
Power voltage	10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS *4
Environmental resistance	Pollution degree	2
Ambient temperature	-10 to +50 °C (No freezing)
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes
Material	Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight	Approx. 150 g (including accessories)
1 ±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected. 2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less 3 Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less 4 Use with the over current protection device which is rated 30 V or more and not more than 1 A. *5 Does not include the power consumption of the load. The power consumption with expansion units installed is the total of each amplifier unit’s power consumption. Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW