Bestsellers

 Prev
1 2 3 4 5 6 7 8 9 10 11 12 13
Next  7 - 21
Sort Alphabetically: A to Z
24 Per Page
Beckhoff EL2502 EtherCAT Terminal, 2-channel PWM output, 24 V DC, 0.5 A
$255.00

Order today and receive in 4 weeks (pay when ready):

$0.00

Brand:BECKHOFF, Condition:new
mark/space ratio is preset by a 16-bit value from the automation device. The output stage is protected against overload and short-circuit. The ...
Out of stock
Beckhoff EL2622 EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A, without power contacts
$255.00
Brand:BECKHOFF, Condition:new
The EL2622 output terminal has two relays, each with a single contact. It is universally applicable for switching mains voltage consumers. The signal state...
11 in stock (more units ~3 weeks)
+ −
Beckhoff EL2809 EtherCAT Terminal, 16-channel digital output, 24 V DC, 0.5 A
$187.00
Brand:BECKHOFF, Condition:new, ORIGINAL PACKAGING / FACTORY SEALED, Sourced from:MANUFACTURER NETWORK, Status:ACTIVE
The EL2809 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level...
10 in stock (more units ~3 weeks)
+ −
Beckhoff EL3162 EtherCAT Terminal, 2-channel analog input, voltage, 0…10 V, 16 bit, single-ended
$455.00
Brand:BECKHOFF, Condition:new
The EL3162 analog input terminal processes signals in the range between 0 and 10 V. The voltage is digitized to a resolution of 16 bits, and...
3 in stock (more units ~3 weeks)
+ −
Beckhoff EL3202-0010 | EtherCAT Terminal, 2-channel analog input, temperature, RTD (Pt100), 16 bit, high-precision
$444.00
Brand:BECKHOFF, Condition:new
The EL3202-0010 is the high-precision version of the EL3202. The EL3202-0010 analog input terminal facilitates the direct connection of two resistance...
1 in stock (more units ~3 weeks)
+ −
Beckhoff EL3214 | EtherCAT Terminal, 4-channel analog input, temperature, RTD (Pt100), 16 bit, 3-wire connection
$550.00
Brand:BECKHOFF, Condition:new
The EL3214 analog input terminal facilitates the direct connection of four resistance sensors using 3-wire technology over a width of 12 mm (high-density...
2 in stock (more units ~3 weeks)
+ −
Beckhoff EL3314 EtherCAT Terminal, 4-channel analog input, temperature, thermocouple, 16 bit
$315.00
Brand:BECKHOFF, Condition:new
The EL3314 analog input terminal allows four thermocouples to be connected directly. The  EtherCAT  Terminal circuit can operate thermocouple...
2 in stock (more units ~3 weeks)
+ −
Beckhoff EL4024 | EtherCAT Terminal, 4-channel analog output, current, 4…20 mA, 12 bit
$335.00
Brand:BECKHOFF, Condition:new
The EL4024 analog output terminal generates signals in the range between 4 and 20 mA. The power is supplied to the process level with a resolution...
2 in stock (more units ~3 weeks)
+ −
Beckhoff EL5101 EtherCAT Terminal, 1-channel encoder interface, incremental, 5 V DC (DIFF RS422, TTL), 1 MHz
$500.00
Brand:BECKHOFF, Condition:new
The EL5101  EtherCAT  Terminal is an interface for the direct connection of incremental encoders with differential signals (RS422) or TTL single...
4 in stock (more units ~3 weeks)
+ −
Beckhoff EL6001 EtherCAT Terminal, 1-channel communication interface, serial, RS23
$335.00
Brand:BECKHOFF, Condition:new
The EL6001 serial interface enables the connection of devices with RS232 interface and operates in conformity with the CCITT V.28/DIN 66 259-1 standards....
1 in stock (more units ~3 weeks)
+ −
Beckhoff EL6070 EtherCAT Terminal, license key for TwinCAT 3.1
$350.00
Brand:BECKHOFF, Condition:new
TwinCAT  3.1 offers an option to manage TwinCAT software licenses via the  EtherCAT  Terminal EL6070. The EL6070 embodies the hardware...
3 in stock (more units ~3 weeks)
+ −
Beckhoff EL6631-0010 EtherCAT Terminal, 2-port communication interface, PROFINET RT, device
$580.00

Order today and receive in 4 weeks (pay when ready):

$0.00

Brand:BECKHOFF, Condition:new
The EL6631 PROFINET RT controller (master) terminal supports the complete real-time function (RT) as well as extensive diagnostic possibilities. All...
+ −
Beckhoff EL6652-0010 EtherCAT Slave Terminal, 2-port communication interface, EtherNet/IP, scanner
$2,697.00

Order today and receive in 4 weeks (pay when ready):

$0.00

Brand:BECKHOFF, Condition:new
The EL6652 EtherNet/IP-Master Terminal (scanner) has a switched 2-port  Ethernet  connection and can thus be operated in a line with further...
Out of stock
Beckhoff EL6731-0010 EtherCAT Terminal, 1-channel communication interface, PROFIBUS, slave
$455.00
Brand:BECKHOFF, Condition:new
The  PROFIBUS  master terminal EL6731 supports the PROFIBUS protocol with all its features. Within an  EtherCAT  Terminal network, it...
1 in stock (more units ~3 weeks)
+ −
Beckhoff EL6900 EtherCAT Terminal communication interface, TwinSAFE Logic
$195.00
Brand:BECKHOFF, Condition:new
The EL6900  TwinSAFE  component is a dedicated safety controller. It is used for the realization of safety-oriented applications on the basis of...
1 in stock (more units ~3 weeks)
+ −
Beckhoff EL6910 EtherCAT Terminal communication interface, TwinSAFE Logic
$980.00
Brand:BECKHOFF, Condition:new
The EL6910 represents the new generation of dedicated safety controllers. While the EL6900 as its predecessor provided only function blocks based on Boolean...
2 in stock (more units ~3 weeks)
+ −
Beckhoff EL7031 EtherCAT Terminal, 1-channel motion interface, stepper motor, 24 V DC, 1.5 A
$380.00
Brand:BECKHOFF, Condition:new
The EL7031  EtherCAT  Terminal is intended for the direct connection of stepper Motors in the low power range up to 1.5 A. The compact...
2 in stock (more units ~3 weeks)
+ −
Beckhoff EL7041 EtherCAT Terminal, 1-channel motion interface, stepper motor, 48 V DC, 5 A, with incremental encoder
$397.00
Brand:BECKHOFF, Condition:new
The EL7041  EtherCAT  Terminal is intended for the direct connection of stepper Motors in the mid power range up to 5 A an a voltage range...
1 in stock (more units ~3 weeks)
+ −
Beckhoff EL9011 Bus end cover
$25.00
Brand:BECKHOFF, Condition:new, ORIGINAL PACKAGING, Sourced from:MANUFACTURER NETWORK, Status:ACTIVE
Technical data EL9011 Technology bus end cover Bit width in the process image 0 Housing width 5 mm Side by side mounting on EtherCAT...
48 in stock (more units ~3 weeks)
+ −
Beckhoff EL9184 Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DC
$120.00
Brand:BECKHOFF, Condition:new
The EL9184 potential distribution terminal provides the supply voltage via the front-side terminal contacts. 24 V and 0 V can each be tapped 8x...
11 in stock (more units ~3 weeks)
+ −
Beckhoff EL9186 Potential distribution terminal, 8 x 24 V DC
$115.00
Brand:BECKHOFF, Condition:new
The EL9186 potential distribution terminal provides 8 terminal points with the 24 V potential at the front on the terminal contacts. The 24 V...
10 in stock (more units ~3 weeks)
+ −
Beckhoff EL9187 Potential distribution terminal, 8 x 0 V DC
$39.00

Order today and receive in 4 weeks (pay when ready):

$0.00

Brand:BECKHOFF, Condition:new
The EL9187 potential distribution terminal provides 8 terminal points with the 0 V potential at the front on the terminal contacts. The 0 V power...
+ −
Beckhoff EL9188 Potential distribution terminal, 16 x 24 V DC
$107.00
Brand:BECKHOFF, Condition:new
The EL9188 potential distribution terminal provides 16 terminal points with the 24 V potential at the front on the terminal contacts. The 24 V...
12 in stock (more units ~3 weeks)
+ −
Beckhoff EL9410 Power supply terminal for E-bus, with diagnostics
$115.00
Brand:BECKHOFF, Condition:new, ORIGINAL PACKAGING / FACTORY SEALED, Sourced from:MANUFACTURER NETWORK
The  EL9410  power supply terminal is used to refresh the E-bus. Data is exchanged between the coupler and the  EtherCAT  Terminal over...
14 in stock (more units ~3 weeks)
+ −
 Prev
1 2 3 4 5 6 7 8 9 10 11 12 13
Next  7 - 21