Home/Products/FS-M1P

FS-M1P

KEYENCE, NEW, ORIGINAL PACKAGING, OLD STOCK, Source:MANUFACTURER'S NETWORK, Status:ACTIVE

$122.00

Order today and receive in 4 weeks. Pay when ready:

$0.00

CHECK AVAILABILITY

CODE: FS-M1P

Availability: PREORDER

Quantity:

+ −

Description

Model	FS-M1P
Type	Main unit
Output	PNP
Light source	Red LED
Sensitivity adjustment/Mode selection	8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)
Response time	250 µs (FINE) /500 µs (TURBO)
Operation mode	LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp	Output: Red LED Stable operation: Green LED
Timer function	ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
Input	―
Control output	PNP open-collector 100 mA max. (40 VDC max.), Residual voltage: 1 V max.
Stability output	PNP open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max.^*1
Protection circuit	Reversed polarity protection, over-current protection, surge absorber
Unit expansion	Up to 16 expansion units can be connected (a total of 17 units).^*2
Mutual interference suppression	FINE : 4, TURBO/SUPER: 8
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption	35 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature	-10 to +55 °C 14 to 131 °F (No freezing)^*3
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material	Polycarbonate
Weight	Approx. 75 g
^1 Only the FS-T1 and FS-M1 can provide stability outputs. ^2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to 50°C 14 to 122°F, 11 to 16 Units: -10 to 45°C 14 to 113°F ^*3 When several units are connected, the ambient temperature requirement varies depending on the total number of units connected. When 3 to 10 units: -10 to +50 °C 14 to 122 °F When 11 to 16 units: -10 to +45 °C 14 to 113 °F When connecting several units, be sure to mount the units to a metallic DIN rail. Make sure that the output current does not exceed 20 mA.