Home/Products/Keyence FS-N11CN Fiber Amplifier, M8 Connector Type, Main Unit, NP

Keyence FS-N11CN Fiber Amplifier, M8 Connector Type, Main Unit, NP

Brand:KEYENCE, Condition:new

$139.00

CHECK AVAILABILITY

Part №: FS-N11CN

Availability: 2 in stock (more units ~3 weeks)

Quantity:

+ −

Description

Specifications

Model	FS-N11CN
Type	Standard 1 output M8 connector*1
Output	NPN
Main unit/expansion unit	Main unit
Control output	1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Monitor output (1-5 V)	-
External input	1 Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.)
Light source LED	Red, 4-element LED
APC	ON/OFF switchable (Factory setting: OFF)
Response time	50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units	0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion	Up to 16 units can be connected total (two output type is treated as two units)
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current Consumption	Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)2 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)2 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance	Ambient light	Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
Ambient temperature	-20 to +55 °C -4 to +131 °F (No freezing)*3
Relative humidity	35 to 85 % RH (No condensation)
Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Shock resistance	500 m/s2, 3 times in each of the X, Y, and Z directions
Case material	Both main unit and expansion unit housing material: Polycarbonate
Weight	Approx. 22 g
1 Use a cable length of 30 m 98.43' or less for M8 connector and e-CON connector types. 2 Increases 100 mW (4.0 mA) for High Speed mode *3 One or two more units connected: -20 to +55 °C (-4 to +131 °F); 3 to 10 more units connected: -20 to +50 °C (-4 to +122 °F); 11 to 16 more units connected: -20 to +45 °C (-4 to +113 °F). When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.