| Model 230
Two Conductors,
30 Amps
|
|
|
| Disconnects included (4 lg.)
Boot Kit available (optional, please contact us to order)
Available with stainless steel ball-bearing (230-SS) |
| Model No. | Terminals | Voltage
AC/DC | Amp
Rating
@240VAC | Max.
Freq.
MHz | Contact
Resistance | Max.
RPM | Temp
Max. F (C) /
Min. F (C) | Rotation
Torque (gm-cm) | Circuit
Separation |
| 230 | 2 | 0-250 | 30 | 200 | | 1800 | 140 (60) /-20(-29) | 200 | |
| 230-SS | 2 | 0-250 | 30 | 200 | | 1800 | 140 (60) /-20(-29) | 200 | |
"SS" designation indicates stainless steel ball bearing (recommended for wet or corrosive environments)
| 55251
Terminal 16 - 14 AWG
(qty. 2 included) | 57230
Boot Kit for dust/splash protection
IP51 (optional, not included) |
| 55250
16 - 14 AWG (qty. 2 included) |
|
| Terminals for other wire gauges are available.
(22-18 AWG and 12-10 AWG) |
Installation Notes:- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of the connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|
