Description
Product Details
FX2N PLC
Choice of 6 I/O sizes, expandable up to 256 I/OHigh processing speed, 0.08μs/basic instruction125 applied instructions, 3072 auxiliary relays, 256 timers, 235 counters, 8000 data registers8K step RAM program memory (expandable to 16K with EEPROM)24Vdc 460mA output for sensors etc (250mA for 16 and 32 I/O)100% backward compatibility with older FX units
Mitsubishi FX1S, FX1N & FX2N Base Units
27 basic instructions
Networking/communications ability using optional RS-232, RS-422 and RS-485 modules
60kHz high speed counter
DIN rail or surface mount
Password security
Real time clock and Run/Stop switch built in
Choice of relay or transistor output models
Relay outputs rated 240Vac or 30Vdc, up to 2A per point max.
Transistor outputs rated 5V to 30Vdc, up to 0.5A per point max.
Program using GX developer FX software stock no. 399-7806
Choice of ac or dc powered models (FX2N is ac only)
ac type supply voltage 100-240Vac +10% -15%, 50/60Hz
dc type supply voltage 24Vdc +20% -15>#/span###
In addition, these features are common to the FX1N and FX1S:
0.55 to 0.7μs/basic instruction processing speed
Optional data display stock no. 383-0258 available
Two potentiometers built in for adjusting timers etc
24Vdc 400mA output for sensors etc on ac powered units
Specifications
| Attribute | Value |
| For Use With | FX2N Series |
| Manufacturer Series | FX2N |
| Number of Inputs | 16 (Digital) |
| Output Type | Relay |
| Input Type | Digital |
| Voltage Category | 100 → 240 V ac |
| Number of Outputs | 16 (Relay) |
| Communication Port Type | RS232, RS422, RS485 |
| Program Capacity | 8000 Steps |
| Programming Language Used | Ladder Logic |
| Programming Interface | Computer |
| Mounting Type | DIN Rail |
| Dimensions | 90 x 150 x 87 mm |
| Battery Backup | Yes |
| Depth | 87mm |
| Minimum Operating Temperature | 0°C |
| Width | 150mm |
| Length | 90mm |
| Maximum Operating Temperature | +55°C |
| Output Current | 2 A |
| Number of Communication Ports | 1 |
MANUFACTURERS
Price history
The price has not changed yet. We will show it on this chart once it changes