Description
The Mitsubishi MR-J2-60A (MRJ260A) is a Melservo MR-J2 series servo amplifier. The amplifier has a power supply voltage range of 200 to 230VAC when the voltage is working on 3-phases. The Melservo MR-J2 servo amplifier may also run on 1-phase which has a voltage of 230-VAC. The 3-phase voltage of the MR-J2-60A servo amplifier is permitted to fluctuate between 170 to 253VAC; the 1-phase voltage may be sanctioned to span from 207 to 253VAC. The frequency is 50/60Hz, but is allowed to waver between -5% to +5%.
The MR-J2-60A servo amplifier is able to link with a couple of servo motors, the applicable servo motors are as follows: the HA-FF63 and HC-SF52. The chosen servo motor may attach to the servo amplifier in two areas which will be outlined below.
The MR-J2-60A Melservo MR-J2 servo amplifier has four ports. The CN1A port attaches to an output control module that is a specific pulse train output from the A series or FX series. The CN1B port may attach to terminal block that may accept any signal. The CN2 port may attach to the encoder of a servo motor chosen. It is to be also noted that whatever servo motor may also connect to the power supply of the MR-J2-60A servo amplifier by the U, V, and W screw terminals. Then the CN3 port concatenates to a personal computer utilizing a RS-232C communication. Lastly, the MR-J2-60A servo amplifier connects to a magnetic contactor and a circuit breaker by the L1, L2, and L3 screw terminals.
Here is the manual that may have been referenced:
https://dl.mitsubishielectric....
Technical Specifications
Part Number: MR-J2-60A (MRJ260A)
Module Type: Servo Amplifier
Voltage/Frequency: 200 to 230VAC, 3-phase 50/60Hz; 230VAC, 1-phase 50/60Hz
Output Wattage: 600W
Weight: 2.45lbs (1.1kg)
MANUFACTURERS
Price history
The price has not changed yet. We will show it on this chart once it changes