Description
| Sensing method | Grooved-type | |
|---|---|---|
| Model | E3S-GS3E4 | |
| Sensing distance | 30 mm | |
| Standard sensing object | Opaque, 6-mm dia. min. | |
| Minimum detectable object | 3-mm dia. min. (black mark on transparent sheet) | |
| Light source (wavelength) | Infrared LED (950 nm) | |
| Power supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 10% max. | |
| Current consumption | 40 mA max. | |
| Control output | Load power supply voltage: 24 VDC max., Load current: 80 mA max. (residual voltage: 2 V max.); NPN voltage output; Light-ON/Dark-ON mode selector | |
| Protection circuits | Power supply reverse polarity, Output short-circuit protection | |
| Response time | Operate or reset: 1 ms max. | |
| Sensitivity adjustment | One-turn adjuster | |
| Ambient illumination (Receiver side) | Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. | |
| Ambient temperature | Operating: - 25 to 55 °C (with no icing or condensation) Storage: - 40 to 70 °C (with no icing or condensation) | |
| Ambient humidity | Operating: 35% to 85% (with no condensation) Storage: 35% to 95% (with no condensation) | |
| Insulation resistance | 20 MΩ min. (at 500 VDC) | |
| Dielectric strength | 1,000 VAC at 50/60 Hz for 1 min | |
| Vibration resistance (destruction) | 10 to 55 Hz with a 1.5-mm double amplitude for 2 h each in X, Y and Z directions | |
| Shock resistance (destruction) | 500 m/s2, for 3 times each in X, Y and Z directions | |
| Degree of protection | IEC IP67 | |
| Connection method | Pre-wired (standard length: 2 m) | |
| Weight (packed state) | Approx. 330 g | |
| Materials | Case | Zinc die-cast |
| Lens | Polycarbonate | |
| Indicator window | Polycarbonate | |
| Accessories | Adjustment screwdriver, Sensitivity adjuster, Instruction sheet | |
last update: September 02, 2015
MANUFACTURERS
Price history
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes