Description
Specifications
| Frame Size | 42mm |
|---|---|
| Type | Harmonic Geared Type |
| Shaft Type | Single Shaft |
| Electromagnetic Brake | Without |
| Cable | 3m |
| Maximum Holding Torque | 3.5N･m |
| Rotor Inertia J | 75×10^-7kg･m^2 |
| Speed Range | 0-70r/min |
| Gear Ratio | 50 |
| Resolution Setting: 1000 P/R | 0.0072˚/Pulse |
| Rated Torque | 3.5N･m |
| Maximum Instantaneous Torque | 8.3N･m |
| Lost Motion (Load Torque) | 1.5 min max. (±0.16N・m) |
| Power Supply Input Voltage | Single-Phase 200-230VAC |
| Power Supply Input Permissible Voltage Range | -15～+10>#/td### |
| Power Supply Input Frequency | 50/60Hz |
| Power Supply Input Current | 1.7A |
| CE Marking | affixed |
| Speed and Positioning Control Command | Pulse Input (Negative logic pulse input) |
| Maximum Input Pulse Frequency | 250 kHz (Duty: 50%) |
| Protective Function | When the following protective functions are activated, the alarm signal will be output, then the motor will coast to a stop. The alarm LED on the driver will blink for the corresponding number of times shown in ( ). Overheat (1), Overload (2), Overvoltage (3), Speed Error (4), Overcurrent (5), Overspeed (6), EEPROM Data Error (7), Sensor Error (8), System Error (Lights) |
| Mass: Motor | 0.67kg |
| Mass: Control Circuit | 0.8kg |
MANUFACTURERS
Price history
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes