Description
SPECIFICATION
Specifications table for model FX-551-C2
Item | Performance characteristics |
---|---|
CE Marking Directive Compliance | EMC Directive, RoHS Directive |
Supply Voltage | 12 to 24 V DC +10-15 % Ripple P-P 10 % or less |
Power Consumption | Normal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
Output | NPN open-collector transistor ・Maximum sink current : 100 mA ・Applied voltage : 30 V DC or less (between output and 0 V) ・Residual voltage : 2 V or less (at maximum sink current) |
Output: Output Operation | Switchable either Light-ON or Dark-ON by L/D mode |
Output: Short-Circuit Protection | Incorporated |
Response Time | FAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectable |
Sensitivity Setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
Incident Light Sensitivity Setting | Incorporated, 4 steps |
Incident Light Intensity Display Range | FAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999 |
Timer Function | Incorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffective |
Timer Function: Timer Period | Timer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx., Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx. (Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms. |
Different Frequency Interference Prevention Function | Incorporated (up to 4 units). Note that the response time varies depending on the setting. F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less (Note): This function increases the hysteresis. Check the sensing condition when using the function. |
Protection | IP40(IEC) |
Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 units are mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉ |
Emitting Element (Modulated) | Red LED (Peak emission wavelength : 660 nm 0.026 mil) |
Material | Enclosure, Case cover : Polycarbonate, Switch : Polyacetal |
Cable | 0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
Cable Extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
Weight (Typ.) | Net weight : 55 g approx., Gross weight : 90 g approx. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
Directive Compliance | EMC Directive, RoHS Directive |
Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
MANUFACTURERS
Price history
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes