Schneider Electric PROFACE PFXGP-4401WADW HMI 7" TFT Color LCD

Standard product information
Family 
HMI

Series 
GP4000 Series

Size 
7" Wide

Model 
PFXGP4401WADW

Global Code 
PFXGP4401WADW

Product Features 
7" Wide DC Analog

Repair Status 
✔ (Maintenance service is available, able to be maintained.)

Display specifications
Display type 
TFT Color LCD

Display size 
7.0"

Resolution 
800 x 480 pixels (WVGA)

Effective display area 
W152.4 x H91.4 mm [W6.0 x H3.6 in.]

Display colors 
65,536 colors (No blink) / 16,384 colors (Blink)

Backlight 
White LED (Not user replaceable. When replacement is required, contact your local distributor.)

Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)

Brightness control 
8 Levels (Adjusted with touch panel or software)

Touch panel type 
Resistive Film (analog)

Touch panel resolution 
1,024 x 1,024

Touch panel lifetime 
1,000,000 times or more

Language fonts 
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese, Simplified Chinese, Thai and Cyrillic can be added from the font setting of the screen editor. )

Character sizes 
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts

Font sizes 
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1

8 x 8 dots 
100 char. x 60 rows

8 x 16 dots 
100 char. x 30 rows

16 x 16 dots 
50 char. x 30 rows

32 x 32 dots 
25 char. x 15 rows

1Other font sizes can be set up with the Editor software.

Electrical specifications
Rated input voltage 
24 Vdc

Input voltage limits 
19.2 to 28.8 Vdc

Allowable voltage drop 
5 ms or less

Power consumption 
3.4 W or less

In-rush current 
30 A or less

Noise immunity 
Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)

Insulation resistance 
500 Vdc, 10 MΩ or more (between power terminal and FG terminals)

Environmental specifications
International safety standards 

Surrounding air temperature 
0 to 50 °C [32 to 122 °F]

Storage temperature 
-20 to +60 °C [-4 to 140 °F]

Ambient humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Storage humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)

Dust 
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)

Pollution degree 
For use in Pollution Degree 2 environment

Corrosive gases 
Free of corrosive gases

Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance 
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance 
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times

Electrostatic discharge immunity 
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)

Memory
Application memory 
When using GP-Pro EX:
- Media: FLASH EPROM
- Screen Area: 16MB *Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used.
- User Font Area: 8MB
- Logic Program Area: 132KB (Equivalent to 15,000 steps) *Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
- Free Space: None

Removable System: No

Backup memory 
When using GP-Pro EX:
- Screen Area: SRAM 128KB
- Variable Area: None

Battery: Replaceable battery / Primary battery for clock data backup

Clock accuracy 
±65 sec./month (deviation at room temperature and power is OFF)*2

2Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

Interface specifications
Serial (COM1) 
Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)

Serial (COM2) 
Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub 9 pin (plug)

USB (Type A) 
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 >#br###Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less

USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less

Ethernet 
IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

SD card 
SD Card Slot x 1

Structural specifications
Grounding 
Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)

Cooling method 
Natural air circulation

Structure 
IP65f NEMA #250 TYPE 4X/13 (on the front panel when properly installed in an enclosure)*3

External dimensions 
W218 x H173 x D60 mm [W8.59 x H6.81 x D2.37 in.]

Panel cut-out dimensions 
W204.5 x H159.5 mm [W8.05 x H6.28 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*4

Weight 
1.2 kg [2.65 lb] or less

3

4>span class="footnote-data">For dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

Dimensions
External dimensions 

Panel cut-out dimensions 

External dimensions with cable