Home/Products/Schneider Electric ABL8MEM24012 Schneider Electric ABL8MEM24012 Picture regulated power supply, Phaseo, 100 to 240 V, 24 V, 1.2 A

Free shipping

Schneider Electric ABL8MEM24012 Schneider Electric ABL8MEM24012 Picture regulated power supply, Phaseo, 100 to 240 V, 24 V, 1.2 A

Brand:SCHNEIDER ELECTRIC, Condition:new

$233.00

Order today and receive in 4 weeks (pay when ready):

$0.00

CHECK AVAILABILITY

Part №: ABL8MEM24012

Availability: PREORDER

Quantity:

+ −

Description

This ABL8 regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 1.2A at 24V DC and a rated power output of 30W. Most of these power supplies have auto protection reset. A few have auto / manual protection reset. Some of these power supplies can be mounted directly to a panel. It installs on DIN rail and is 54mm-wide. Automatic reset allows short-term faults to be cleared and systems to restart without the need to disturb on-duty maintenance engineers. It provides a power reserve allowing to deliver a current of 150% its nominal rating for a short time allows handling of simultaneous inrush current when starting a process. It weighs 0.195kg. It is a power supply for industrial use, rail mounting. It conforms to UL 508, CSA C22.2 No60950-1 standards. It is certified by KC, TUV60950-1, RCM, EAC, CCSAus, CSA22-2 No 950, CULus 508. The GB2CB07, GB2CD07, GB2DB07, GB2CS07 miniature circuit breakers are recommanded for its protection. It has LED diagnostics indicator available in the front for troubleshooting instantly. It installs on DIN rail. The ABL8MEM/ABL7RM (modular) range meets all the needs of simple automation systems with power ratings from 7 to 60 W and an output voltage of 5 V DC, 12 V DC, or 24V DC.

Specifications

Main

Range of Product	Modicon Power Supply
Product or Component Type	Power supply
Power supply type	Regulated switch mode
Nominal input voltage	100...240 V AC phase to phase L1-L2 100...240 V AC single phase N-L1 120...250 V DC
rated power in W	30 W
Output voltage	24 V DC
Power supply output current	1.2 A

Complementary

Efficiency at full load	85...264 V AC
Input protection type	Integrated fuse (not interchangeable)
Inrush current	20 A
Power factor	0.5 at 24 V DC
Efficiency	82 >#/span###
Output voltage adjustment	22.2...28.8 V adjustable
Power dissipation in W	6.6 W
Current consumption	0.4 A 240 V AC 0.65 A 100 V AC
Residual ripple	250 mV
Output protection type	Against short-circuits
Connections - terminals	Screw type terminals 2 x 0.14...2 x 2.5 mm², AWG 26...AWG 14) input connection Screw type terminals 4 x 0.14...4 x 2.5 mm², AWG 26...AWG 14) output connection
Status LED	1 LED (Green) output voltage
Depth	2.32 in (59 mm)
Height	3.94 in (100 mm)
Width	2.13 in (54 mm)
Product Weight	0.43 lb(US) (0.195 kg)
Output coupling	Parallel Series
marking	CE
Mounting support	35 x 7.5 mm symmetrical DIN rail panel 2 screws, diameter : 4 mm 35 x 15 mm symmetrical DIN rail
Operating position	Vertical
Supply	SELV EN/IEC 60950-1 SELV EN/IEC 60204-1 SELV IEC 60364-4-41
Dielectric strength	3000 V with between input and output

Environment

standards	UL 508 CSA C22.2 No 60950-1 EN/IEC 62368-1
Product certifications	TUV 60950-1 EAC RCM KC CCSAus CSA 22-2 No 950 CULus 508
Environmental characteristic	EMC EN 55022 Class B EMC EN 61000-6-3 EMC EN/IEC 61000-6-2 EMC EN/IEC 61204-3 Safety EN/IEC 60950-1
Operating altitude	6561.68 ft (2000 m)
IP degree of protection	IP20 conforming to EN/IEC 60529
Ambient air temperature for operation	-13…131 °F (-25…55 °C) without derating mounting position A < 6561.68 ft (2000 m) 131…158 °F (55…70 °C) with derating factor mounting position A < 6561.68 ft (2000 m)