Description
- Integrated terminal temperature compensation
- Tool-free wiring with push-in technology
- Simple wire release using a screwdriver
- Ability to label each terminal
- Plain text labeling also possible
- Test access for standard probes
- Can be customer-coded
The X20TB1E terminal block is equipped with two integrated PT1000 sensors. It is therefore optimally suited for internal terminal temperature compensation.
General information
| Certifications | |
| CE | Yes |
| UKCA | Yes |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| DNV | Temperature: B(0 to 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
Terminal block
| Number of pins | 12 |
| Type of terminal block | Push-in terminal |
| Push-in force per contact | Typ. 10 N |
| Cable type | Only copper wires (no aluminum wires!) |
| Wire stripping length | 7 to 9 mm |
| Connection cross section | |
| Single-wire | 0.08 to 1.50 mm² / 28 to 16 AWG |
| Fine-stranded wires | 0.25 to 1.50 mm² / 24 to 16 AWG |
| With wire end sleeves | 0.25 to 0.75 mm² / 24 to 20 AWG |
| Distance between contacts | |
| Left - Right | 4.2 mm |
| Above - Below | 8.25 mm |
| Terminal temperature compensation | 2x Pt1000 integrated in the terminal |
Electrical properties
| Nominal voltage | 24 VDC |
| Max. voltage | 50 VDC |
| Nominal current | 2 A / contact |
| Contact resistance | ≤5 mΩ |
Ambient conditions
| Temperature | |
| Operation | Corresponds to the X20 module used |
| Relative humidity | |
| Operation | Corresponds to the X20 module used |
MANUFACTURERS
Price history
As soon as the price of the products decreases, you will immediately know about it.
The price has not changed yet. We will show it on this chart once it changes